8
RootsScrub B4550C
FIRST OPERATION
After Unpacking
Verify the machine and accessories with the invoice
copy. Check the machine for any transit damage, if
found contact the branch/dealer immediately.
Owner's personnel are not allowed to unpack the
machine.
Identification of Main parts
Comply with instructions for correct dosage of
cleaning solution. Correct dosage will help
optimize costs and also minimize impact on the
environment. Too much foam can affect the
performance of the machine.
Principle of Operation
A squeegee and suitable brushes or pads are required
for wet cleaning of hard floorings. The rotating brush
scrubs the floor thoroughly, removing dirt through suds,
thereby cleaning the floor. The dirty water is drawn
during the same cycle through the squeegee. Thus, the
floor can be walked on immediately after it is dry and
clean.
2
3
4
1
Useful Tips:
Ÿ
Prior to wet cleaning, it is necessary to sweep the
floor.
Ÿ
This way, not only is the cleaning efficiency
improved, but wear of the brush is also substantially
reduced.
Ÿ
If floors are particularly dirty or if wax has to be
removed (basic cleaning); the floor must be treated
twice.
Ÿ
During the first cycle, the floor is scrubbed with the
cleaning agent selected according to the degree of
dirt encountered, the squeegee remaining lifted.
Ÿ
Allow the cleaning agent to act on the floor for
approx. 5 or 10 minutes, complying with the
manufacturer's instructions.
Ÿ
Scrub the floor once again while the squeegee is
lowered.
Ÿ
Too much foam indicates excessive dosage or
improper suitability of cleaning solution for the
existing kind of dirt.
Ÿ
Cleaning solution particles contained in the soiled
water that are not used will cause formation of foam.
Ÿ
Instructions for dosage are given on the cleaning
solution tank and must ideally adhere to
manufacturer's recommendations.
Ÿ
The ideal type of cleaning solution and the perfect
dosage applicable to it will come through sustained
use of the machine.
4a
4b
1. Fresh water tank
2. Dirty water tank
3. Cylindrical Brush head
4. Squeegee
a) Straight
b) Parabolic
5. Handle
6. Fresh water fill port
7. Control panel
8. Fresh water level indicator
9. Squeegee control handle
10. Pedal for lift/lower brush head
8
10
7
9
5
2
6
3
1
Summary of Contents for RootsScrub B4550C
Page 2: ...2 RootsScrub B4550C...
Page 20: ...20 RootsScrub B4550C NOTES...
Page 21: ...21 RootsScrub B4550C...