Page 35
System configuration
© 2017 Ropam Elektronik
To allow the user to change the configuration using SMS and GPRS channels, select the following
options:
- possible configuration change via SMS
- (allows to control module via SMS commands and
RopamDroid application),
- possible remote programming via GPRS -
allows to connect to the module through the
RopamBasic application via GPRS data.
CHECKING AMOUNT LEFT ON PREPAID CARD
This option allows you to control the cost of prepaid card account. For this function to work properly
should be:
- select the operator of the SIM card installed in the module (drop down menu), if there is no operator
in the list, you can enter the command manually,
- set a lower limit (not less than 5 PLN) that is valid for proper system work.
Account checking with USSD code is performed once a day (since the last reboot).
You can also set up sending account status information to the first phone number from the list of
numbers. The interval to send account information is 7 days. The 7-day period is counted from the last
restart of the BasicGSM 2 module.
Audio voice announcements:
Option to implement the .amr files in the device memory as an audio notification for events on the
system.
- AMR data format
- Data rates: 8kHz sampling, 13bit resolution, 40kb / min
- max. File size: 64kb = 1.5min for assumptions of j / w: 40kb / min
