Page 64
System configuration
© 2017 Ropam Elektronik
Overview of system failure.
If a system failure occurs, next to the icon on the right side will be displayed a yellow
dot indicates the presence of a new failure in the system, check can be made by
clicking the triangle icon with an exclamation point.
View value for analog input I7 or I8.
Possible (set in BasicGSM Manager):
-
Voltage / current scaling to physical values, eg ºC,% Rh, lux,
Temperature chart from the TSR-1 sensor connected to the system.
Temperature chart from TSR-1 sensor connected to the system. Input view.
Possible (set in BasicGSM Manager):
- input number 1-8,
- locking the input after pressing the icon (after disarming the input system are
unlocked),
Output control in module (1-4).
Possible (set in BasicGSM Manager):
- state indication acc. Entry,
- Require code to be included,
Output control of the module. (1-4).
Possible (set in BasicGSM Manager):
- output number,
- state indication acc. Entry,
- Require code to be included,
Output control of the module. (1-4).
1 = white bulb icon
0 = dark bulb icon
Possible (set in BasicGSM Manager):
- No. of output,
- state indication acc. Entry,
- Require code to be included,
