Dehumidifier Safety
5
Dehumidifier Use
FAN SPEED
HIGH
LOW
DRYNESS CONTROL
EMPTY/ADJUST
BUCKET
NORMA L
D
R
Y
E
S
T
OFF
CONTINUOUS
Control A
If your control looks like A or B:
adjusts humidity removal set
point (amount of moisture
removed from room)
indicates the bucket is full
OR
the bucket is not in position
FAN SPEED
HIGH
LOW
DRYNESS CONTROL
EMPTY/ADJUST
BUCKET
NORMA L
D
R
Y
E
S
T
OFF
CONTINUOUS
selects fan speed
Control B
adjusts humidity removal set
point (amount of moisture
removed from room)
indicates the bucket is full
OR
the bucket is not in position
5
Setting the Controls
NOTE:
Before turning dehumidifier on,
be sure that:
•
Bucket is properly inserted into
dehumidifier
•
Bucket is empty
To turn dehumidifier on
Turn DRYNESS CONTROL clockwise. If the
Empty/Adjust Bucket light comes on, the
dehumidifier will not operate. Empty or
adjust bucket.
To turn dehumidifier off
Turn DRYNESS CONTROL
counterclockwise to OFF.
Empty/Adjust bucket light
If this light is on, the dehumidifier is not
running. This light indicates that you
need to check:
•
If the bucket is full, empty bucket and
replace.
•
If the bucket is not in position, remove
bucket and replace. Make sure the
bucket fits all the way into the
dehumidifier and the light is off, or
dehumidifier will not run.
Fan speed (Control B models only)
This controls fan operation. Use desired
setting.
HIGH - for faster moisture removal.
LOW - for slower moisture removal.
Dryness control
This controls the amount of moisture in
the room. Turn control knob clockwise
for more drying. Turn control knob
counterclockwise for less drying. Turn
control knob to “NORMAL” to maintain
average humidity conditions.
NOTE:
For the first few days of use, turn
the DRYNESS CONTROL clockwise to
“DRYEST” to remove extra moisture from
the furnishings as well as the room air.
Minimum operating
temperature is 65°F (18°C)
Minimum operating
temperature is 55°F (13°C)
1187730ENv10 12/3/03 1:11 PM Page 5
