ROPES RARK EQUIPMENT TWEEZLE KEY, User Manual

V01 | November 2021 | English

5

MOUNTING / USE OF THE TWEEZLE KEY

MOUNTING

A.  Mount the TWEEZLE KEY as close as possible 

to the obstacle or element that needs to be 

passed (tree).

B.  The distances between the TWEEZLE KEYS 

must be kept as small as possible but far 

enough apart so that it is not possible to skip 

or tweezle both carabiners at the same time 

and bend the LockD Clips.

C.  Ensure that the TWEEZLE KEY is mounted 

so that the LockD Clips hook falls down after 

tweezling. This avoids bending loads. Avoid 

vertical ascent.

D.  On zip lines or other rolling devices, attach 

the TWEEZLE KEYS so that the LockD Clips 

carabiner cannot become caught at the 

start, i.e. steps must be taken to ensure that 

the LockD Clips does not get stuck in the 

TWEEZLE KEY or slide behind it.

E.  Install the TWEEZLE KEY halves onto the 

securing wire rope, making sure the TWEEZLE 

KEY does not move.

F.  If necessary affix using the assembly clamps 

Screw the screws M5 into TWEEZLE KEY 

using an appropriate wrench.

CAUTION:

Avoid over-tightening as this could damage the 

TWEEZLE KEY.

A

C

D

E

F