background image

Safety  

 

Version 1 

PEX-W5 

Page 3 

 

Maintenance 

The current transformer requires no special maintenance. Regular testing or retightening of 
the terminals is recommended. Dust deposits on the current transformer can be removed with 
dry compressed air. 

 

NOTE

 

Dust depositis and contamination by liquids may lead to the loss of 
function. 

Installation in a control cabinet or terminal box with IP54 is 
recommended. 

 

Disposal 

This device is covered by the EU Directive 2012/19/EU on the reduction of the increasing 
amount of electrical waste, the aim of which is to reduce waste from electrical and electronic 
equipment and to dispose of it in an environmentally sound manner. 
 

INFORMATION

  This device must not be disposed of in the residual waste. 

 
To ensure material recycling or proper disposal, place the device in the designated municipal 
collection point and observe the local regulations. 
Careless and uncontrolled disposal can cause damage to the environment and human 
health. By ensuring that your product is disposed of or recycled in a responsible manner, you 
contribute to the protection of the environment and human health. 
 

Summary of Contents for PEX-W5







Reviews: