Dimensions and assembly
Page 4
PEX-W5
Version 1
2 Dimensions and assembly
The current transformer is mounted on a top hat rail (TS35) measuring 35 x 7.5 mm or 35 x
15 mm in accordance with DIN EN 50022.
Through the opening in the current transformer (diameter 12.8 mm), the high-current cable
connected to the sealing tool must be routed. If the high current cable cannot be routed
through the opening, a high current bar must be ordered, see chapter 3, how to order.
The green connection terminal is intended for the measuring line I
R
to the temperature
controller.
NOTE
The general connection of the current transformer to the control system
can be found in the corresponding controller documentation. Please note
the connection in individual cases according to the ROPEX application
report.
CAUTION
_
The power supply to the temperature control circuit must be switched off
before working on electrical equipment is connected.
