Technical data
Page 58
RES-5008
Version 2
Heating element type
and temperature
range
In addition to the setting through the rotary encoder switch, the setting for
the temperature range and temperature coefficient can be made via the ROPEX
visualisation software (
section 9.22 "USB-interface for visualisation software
Temperature range:
200 °C, 300 °C, 400 °C or 500 °C
Temperature coefficient: 400…4000 ppm/K (variable setting range)
Five ranges can be set using the rotary encoder switches:
Temperature coefficient 1100 ppm/K, 0…300 °C (e.g. alloy A20)
Temperature coefficient 780 ppm/K, 0…300 °C (e.g. alloy L)
Temperature coefficient 1100 ppm/K, 0…500 °C (e.g. alloy A20)
Temperature coefficient 780 ppm/K, 0…500 °C (e.g. alloy L)
Temperature coefficient 3500 ppm/K, 0…300 °C
Please take the necessary setting from the ROPEX application report
Analogue output
(Actual value)
Terminals 17+7
0…10 VDC, I
max
= 5 mA
Corresponding to 0…300 °C or 0…500 °C
Accuracy: ±1% plus 50 mV
Alarm relay
Terminals 12, 13, 14
U
max
= 30 V (DC/AC), I
max
= 1 A, changeover contact, potential-free
Power loss
Max. 20 W
MTTF as per
ISO 13849-1
1522 years (see EN ISO 13849-1, table C.3, Triacs)
Ambient conditions
Maximum altitude 2000 m
Ambient temperature: +5…+45 °C
Maximum relative humidity: 80% at temperatures up to +31 °C, decreasing
linearly to 50% relative humidity at +45 °C.
Degree of protection
IP 20
CAUTION
When the terminals are open, the screw must be screwed in to
ensure contact protection.
Mounting
If several devices are mounted on a top-hat rail,
a minimum distance of 20 mm must be
maintained. In order to ensure sufficient cooling,
the ventilation slots in the housing must
remain free.
When mounting on a horizontal top hat rail,
the movable latch, which is necessary for
fastening, must face downward.
When mounting on a vertical top hat rail, end holders must be installed on both
sides to fasten the regulator mechanically.
Weight
Controller:approx. 0.7 kg (incl. plug-in connector parts)
Terminal:approx. 0.15 kg
Housing material
Controller:plastic, polycarbonate, UL-94-V0
Terminal:black plastic, type Noryl SE1 GFN2
20
