background image

16 

TF 200.01.0041_eng 
 

 

 

 

 

 
Notification! 
 

Ropox will make parts list and circuit diagrams available for extraordinary maintenance 
and repair beyond what is described in this manual. Repair beyond what is described in 
this manual may only be done by Ropox designated service personnel. 

 
 

 
 

8. 

Environmental protection 

The product is not intended to be disposed as municipal waste. Proper disassembly, sorting and disposal of 
components must be done by waste disposal professionals.  

 

Part 

Material 

Cover 

ABS 

Toilet support arm 

Steel 

 

9. 

Accident reporting 

 
The manufacturer of this product recommends any accident with this product that meets all of the following 
criteria reported to the appropriate authority as well as to the manufacturer. 

 
1. There has been or could have been an event 
2. The medical device is considered to be a contributing factor to the case, and 
3. The event resulted or could have resulted in one of the following outcomes: 

 

death - a patient, a user or a third party death 

 

A serious deterioration of a patient's health, a user's or third party health status in the form of: 

o

 

1. Life-threatening disease 

o

 

2. Lasting damage or injury 

o

 

3. Necessary medical or surgical treatment to divert life-threatening illness, permanent injury 

o

 

4. Fetal death, fetal injury or congenital abnormalities. 

 
 

Summary of Contents for 40-40110

















Reviews: