TF 200.01.0010_ENG
10
4.2 Mounting Instructions
Prior to the installation, please make sure that all parts have been provided in accordance with the
list of components (Section 7).
4.2.1 Determine mounting height
A) With the primary user seated in their wheelchair, measure
the height to the top of user’s legs (X). This measurement
ensures the correct height of the unit and provides proper
clearance when the unit is in the down position. Make sure to
measure at the highest point (If the wheelchair has armrests,
consider if these will be in the way and if the height of the unit
should instead be set according to the armrests.)
If the user is not available for taking the measurement, the
recommended default value of X is 670 mm (26,5”).
A) Transfer X-measurement to wall
B) Place the bottom of the
template on the line and
mark out the positions of the
mounting holes. This will
provide approximately 10-
15mm of clearance between
the bottom of the wash basin
and the top of the user’s
legs.
