TF 200.01.0010_ENG
11
4.2.2 Drill holes and mount unit on wall
A) Drill holes at the 8 marked locations
on the wall
A) B) Insert appropriate wall plugs
fitting of the type of wall in which the
product is to be installed
B) C) Mount the QuickWash unit on
the wall using the included frame
screws *7,5x75mm
C) D) Check that the unit is level
D) E) Tighten the screws where
needed
4.2.3 Mount wash basin to unit
A) Attach bolts from the backside of the unit
and fix with washers and nuts.
B) After mounting the wash basin, please
check the following:
1: That the basin is level
2: That the basin is centered compared to
the unit
3: That the release lever works and allows
lowering of the unit
4: That the unit stays in place in both top
and bottom position
5: That the bottom position fits well for the
user, with comfortable level of clearance.
