TF 200.01.0017_ENG
12
4.5 The client is resting in a complete straight position.
With the client in this position, you shall use the Domino Classic sling.
Domino Classic
1. Standing to one side of the client, fold the sling in half along the centre seam
ensuring the labelling and pull straps are facing away from the client. Position the
sling alongside the client.
2. Roll the client in a side resting position, with his back against the sling. Tuck the
sling under the back placing the lowest part of the sling at or below the base of the
spine. Now roll and tuck under the body the top half of the sling.
3. Roll the client on his back, aiming to have the centre seam of the sling in line with
the spine.
4. Roll client on other side and unfold the sling and position it flat on the resting
surface.
5. Return the client to their back.
6. Pull the leg straps downwards until they are straightened out.
7. Position the leg supports under client. Illustrated on page 8.
8. Move spreader bar of the hoist over the client - and position each strap in the
hooks. Use same coloured loop for the two leg supports and shoulder supports
respectively.
9.
Client’s arms must on the
Classic
sling always be placed inside the sling.
10. Lift client slightly above the surface - STOP - make sure that all straps are securely
attached to the hooks of the spreader bar and if necessary make adjustments on
the sling.
11. When you have checked that the sling is properly attached and your client is
comfortable, you may complete the lift.
