6
1
5
2
4
3
El
ectri
cal
Com ponents
W ire diagram
The Bathtub is delivered with the control box already mounted on the frame.
The diagram shows how the cables are connected to the control box placed at
the inside of the cover panel.
All the plugs are water tight,
and therefore they can be a little tricky to connect /
disconnect.
Make sure that the plugs are positioned correct before they are
pushed into the sockets at the control box.
The plugs must be pushed into the
sockets until the “O-ring” is no longer visible.
Motor,
control box and control switch apply to I
P66.
This means that they are
dust tight and protectied against heavy seas,
or powerful j
ets of water.
The electronic system are designed for periodical use only,
this means a max.
duty cycle of 10% ;
2min on /
18min off.
1.
Control box
2.
Mains cable 230V
3.
Motor,
connects to plug 1 & 3
4.
End plug,
connects to plug 2 & 4
5.
Control switch
