9
Faul
t fi
ndi
ng
Fault fi
ndi
ng
W aist handling
Used equipment shall be disposed according to the National law.
W e
recommend to dismount the product to the greatest extent possible,
in a
way that most parts can be reused.
Be aware that this product contains
electronically components.
Example for groups this product can be
sorted in:
metal,
plastic,
cables,
electronics and parts for destruction.
Factors affecting the operation
Temperature:
5°
C to 45°
C
relative humidity:
5% to 85% non-condensing
Factors affecting storage and transport
Bathtub do not move up
or down by using the
hand control
Check if:
Main power connected 230V.
Motor is connected to control box
Hand control is connected to control box
Motors are over loaded
Hand control defect
Check if:
Bathtub works with another hand control
By pressing the up or
down button,
no
movements achieved,
only clicking sounds is
heard from controlbox
Plugs are not connected correctly.
Dismount all cables and re-connect.
Might need a “reset” – see
Bathtub is not horizontally Perform a “Reset”
Push and hold both the up
▲
and down
▼
button,
keep the pressure until the controlbox
has given approx.
. 10 “Bips”.
After that push
the
▼
button.
i
i
