Chapter 2: Hardware Installation
Hardware Installation
2-5
2.5 Unpacking the Subsystem
Use the
Unpacking Checklist
in your package to verify package contents.
Carefully check the items contained in each box before proceeding with
installation.
WARNING!
Do not rely on the non-definitive, summarized unpacking list shown
below--it is for reference only. A detailed packing list can be found in
your product shipping package or product CD.
Each packed box is separated into upper and lower levels.
Upper level:
The box on the upper level contains sixteen (16) drive trays
pre-installed with MUX kits
Lower level:
Three (3) boxes are placed in the lower level. One (1) box
contains the enclosure chassis with all the pre-installed components. The
other two (2) boxes contain the power cords and accessory items.
Accessory items include an audio jack to DB9 Y-cable, null modem,
Quick
Installation Guide
, screws, and a CD containing the
Installation and
Hardware Reference Manual
(this document), the
Fibre to SATA RAID
Subsystem Manual
(Firmware),
RAIDWatch Management Software
and
the
RAIDWatch User’s Manual
.
2.6 Installation Overview
2.6.1 Pre-installed Components
The following components have been pre-installed in the A16F-R2422 and
therefore do not need to be installed:
•
1 - LCD module
•
2 – Front handles (right and left)
•
1 - Backplane board
•
2 - Controller modules
•
2 - DDR RAM DIMM modules (installed in the controller
modules)
•
2 - BBUs
•
2 - Host connection modules
•
1 – Enclosure configuration card
•
2 - PSUs
•
2 - Cooling modules
