G A L A X Y ® A U R O U R A C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
81
Section 3 Management
3.1.5
LUN Details
The LUN Details screen allows you to manage LUNs, as well as run a surface
scan on a single LUN. These are very powerful features currently not found on
other arrays.
The top table shows LUN Details, similar to how LUN Details is shown on the
RAID screen, however there is a Delete function. If you want to delete the
LUN (Note all initiators and targets must be removed first), left-click on the
Delete button. In this table, we see the the name of the LUN (MyLun), the
name of the RAID that it is part of, the size of the LUN (in Gigabytes), and
offset (Also in Gigabytes).
Below the LUN details table, is a table where you can run a surface scan of a
LUN. There is no separate screen for this – the results are shown on the RAID
surface scan screen.
CAUTION:
A write scan will erase data on the LUN.
The controls and reports are the same as the RAID Surface scan - see the
previous section for instructions.
