G A L A X Y N A S L X C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
51
Section 3 Menu Functions
L
Important: In order to use an Incremental method, choose it from the Setting ->
General-> Backup Method menu. Please use method “Incremental – Using modified
time” (Reset Archive bit – does not work on the XFS partition types).
BrightStor:
“Allow IP or Network IP”: Please enter the Backup server’s IP address in order to grant access
to the GalaxyNASLX2 (please refer to “FTP Settings” for syntax details). If you leave this field
empty, all BrightStor backup servers in the network will have access to the NAS server.
User:
By providing a user name, only this BrightStor user will have access to the GalaxyNASLX2 . If
left empty, all users will be able to access the NAS server.
3.2.10 Function “Language Settings” Figure 3.15
English and German are supported.
3.3.0 ‘Setup’ ‘Network’ Functions
3.3.1 Function “IP address” Figure 3.16
If you want to select an address instead of assigning an IP address automatically via DHCP,
you can do it here.
It is strongly recommended to use static IP for the server (please uncheck Use DHCP box).
If you set new IP address, during activation, you will lose your connection to the server and
you will have to log in again. In the URL entry line of your browser, please enter the new IP
address.
If you do not get access, connect a keyboard and monitor and use the console commands to
set the new IP address. In order to access servers in another subnet, you need to enter the
address of a router as the Gateway.
"
Note: In case you use NTP server to maintain proper time & date, please make
sure you have proper Gateway and DNS settings.
3.3.2 Function “NIC assignments” Figure 3.16
Using this function you can disable access to the GalaxyNASLX2 WEB administration”, for
NICs in the NAS system. If a “www” option is inactive, it is not possible to launch the “Rorke
Data WEB administration” on the selected network card (e.g. “eth0”). If the option SMB is in
an active mode, the access to the network shares with LDAP, ADS or PDC authentication will
not be possible.
