Galaxy RAID GALHDX-7370S-8+12U4D Installation and Hardware Reference Manual
3-6
Status-indicating LEDs
3.2.5 Drive Tray LEDs
Two LED indicators are located on the right side of each drive tray. (See
Figure 3- 4
)
Refer to
Table 3- 5
for LED definitions. When notified by a drive failure message,
you should check the drive tray indicators to find the correct location of the failed
drive. Replacing the wrong drive can cause fatal failure of a logical array.
Figure 3- 4: Drive Tray LEDs
LED Name
Color
Status
Drive Busy
Blue
ON
indicates read/write activity on the drive.
OFF
indicates there is no read/write activity on the drive.
Power
Status
Red/
Green
GREEN
indicates that power is being supplied to the
drive.
OFF
indicates no power is being supplied to the drive or
the drive tray is not properly installed. .
RED
indicates drive failure or faults have occurred.
Table 3- 5: Drive Tray LED Definitions
Summary of Contents for Galaxy Raid GALHDX-7370S-8U4D
Page 43: ...Chapter 2 Installation 2 15...