Galaxy Raid GHDX4 SAS<>-SAS/SATA 12Bay
Installation / Hardware Reference Manual
2-14
Attaching an Inner Glide
Step 4.
Adjust the length of the rail assembly and make sure the
bend of the L-shape rail (#01) faces inward. Loosen the
four screws near the end of the L-shape bracket to
adjust rail length. Fasten them when length adjustment
is done.
Adjust the Rail Length
Fitting the Rail into Rack
Step 5.
Position the front-end of a rail below the top cage nut.
Secure the rail to the front and rear rack posts each
using two M5 screws (#05). (See Component drawing