background image

11

EN

Timer

Timer has not been set.

Timer has been set (125 minutes).

6. 

SAFETY

 WARNING!

Before use, read safety instructions.

6.1 Temperature safety

A sensor continuously measures the 
temperature of certain parts of the hob. Every 
cooking zone is equipped with a sensor that 
measures the temperature of the bottom of the 
pan to avoid any risk of overheating when a pan 
boils dry. In case of temperatures rising too 
high, the cooking level is reduced automatically 
or the hob switches off automatically.

6.2 Cooking-time limiter

 WARNING!

The cooking-time limiter is a safety function of 
your cooking appliance. It will operate if you 
forget to switch off your hob. Depending on the 
power level you have chosen, the cooking time 
will be limited as follows:

Power level

Maximum operating time (in 
hours, minutes)

1

8 hours, 36 min.

2

6 hours, 42 min.

6.3 Power management

Two cooking zones one in front of the other 
effect each other. When both of these cooking 
zones are switched on at the same time, the 
power is automatically shared between them. 
When the Boost function is selected, the other 
cooking zone will be set to a somewhat lower 
setting. If a cooking zone is set at boost and 
you want to set the other one to setting 9, the 
cooking zone with boost will automatically go to 
a lower setting. Automatic heat-up function is 
deactivated.

3

5 hours, 18 min.

4

4 hours, 18 min.

5

3 hours, 30 min.

6

2 hours, 18 min.

7

2 hours, 18 min.

8

1 hour, 48 min.

9

1 hour, 30 min.

P (boost)

5 min (then switches back to 
level 9)

7. 

BEFORE FIRST USE

7.1 Use of the touch keys 
and slide control

Place the tip of your finger flat on a key or the 
slide control to achieve the best results. You do
not have to apply any pressure. The touch keys 
only react to the light pressure of a fingertip.
Do not operate the controls with any other 
objects.

7.2 Induction noises

A ticking sound

This is caused by the capacity limiter on the left 

and right zones. Ticking can also occur at lower
cooking levels.

Pans are making noise

Pans can make some noise during cooking. 
This is caused by the energy flowing from the 
hob to the saucepan. At high levels, this is 
perfectly normal for some pans. It will not 
damage either the pans or the hob.

The fan is making noise

To enlarge the lifespan of the electronics, the 
appliance is equipped with a fan. If you use the
appliance intense, the fan is activated to cool 

Summary of Contents for ELEGANT





























Reviews: