CAUTION
LAMP AND STAINLESS STEEL SCREEN MAY BE VERY HOT AFTER
PROLONGED OPERATION. EITHER WAIT FOR SCREEN AND BULB TO COOL OR
USE PROTECTIVE GLOVES TO CHANGE LAMP ASSEMBLY.
USE OF AN INCORRECT POWER SOURCE MAY CAUSE PERMANENT DAMAGE
TO THE BALLAST POWER SUPPLY.
DO NOT PLUG OR UNPLUG INTERCONNECT CABLES WITH THE POWER ON.
THIS CAN SEVERELY DAMAGE THE INTERCONNECT CABLES.
WARNING
DO NOT CONNECT A MULTIMETER TO THE OUTPUT OF THE LAMP
CONNECTOR. THE VOLTAGE IS VERY HIGH (5000-7500 VOLTS) AND WILL
DESTROY ANY VOM. ONLY TRAINED PERSONEL WITH THE CORRECT
EQUIPMENT SHOULD ATTEMPT OUTPUT MEASUREMENTS.
80-06003B 05APR04
6
