REMOTE OCEAN SYSTEMS
SEASTAR OPERATION AND MAINTENANCE MANUAL
10-01313 REV D
14
Figure 8. Lux Output vs Analog Dimming Percent
4.4.2.
24VDC With Serial Dimming Operation
Figure 9 shows the light
’
s dimming properties when used with RS485 control. The serial-dimming Seastar can be
operated using the ROS Eos GUI, or by sending serial commands from a customer device or software. Table 3
lists ROS VISCA serial parameters. Table 4 lists commands and inquiries that may be sent to the Seastar, along
with their expected responses. Table 5 lists standard response messages.
NOTE
All serial commands, inquiries and responses are terminated with hex byte ff
(255).