REMOTE OCEAN SYSTEMS
SEASTAR OPERATION AND MAINTENANCE MANUAL
10-01313 REV D
28
Figure 18. Connections
6.4.
Light Output Suddenly Stopped
If the light has suddenly stopped outputting light, consider the following guidance.
WARNING
A sudden light failure may indicate a short circuit. Do not reconnect the light to
power until the root cause of failure has been identified.
Replacing a shorted component may not address the root cause of failure,
leading rapidly to a second failure. If the root cause of a short cannot be
confidently identified and resolved, contact ROS support prior to replacing any
components or rebuilding the light.
1.
Disconnect the light from power.
2.
Check any fuses or circuit breakers. A blown fuse or tripped breaker is a likely sign of a short.
