Parts
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
AnoFrame
TM
Step 1
Insert corner brackets into vertical
AnoFrame side rails.
Fig. 1 & Fig.2
Note:
Assembly brackets tension
tabs face towards outside of frames.
Step 2
Install MultiClips in top frame rail.
Holding clip at slight angle, first insert
one round end, then press down on
other round end and push MultiClip
into rail.
Fig 2
Step 3
Push top and bottom horizonral Ano
rails onto one side rail as shown in
Fig.
3.
Step 4
Insert poster through side opening.
Fig 4
Step 5
Push final side rail into place as shown
in
Fig 5.
Suspend poster.
Note: The AnoFrame shown here is
a round profile. It is available in
either round or square profile.
Instructions For Assembly
Incept-8.15.02
Figure 1
Figure 5
The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSANFRNoLoad
Figure 3
Corner
Brackets
MultiClips
1UP-0100
AnoFrame Rails
12AF-100
Figure 2
Figure 4
Round Profile Instruction Sheet
top horizontal rail w/MultiClips
horizontal rail
side rail
