Parts
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
AnoFrame
TM
Step 1
Insert corner brackets into vertical
AnoFrame side rails.
Fig. 1
Note:
Assembly brackets tension
tabs face towards outside of frames.
Step 2
Push top and bottom horizontal Ano
rails onto one side rail as shown in
Fig. 2
Step 3
Insert poster through side opening.
Fig 3
Step 4
Push final side rail into place as shown
in
Fig 4.
Step 5
Install wall mounting hangers using a
Phillips head screwdriver. A plastic
expansion anchor is suggested for
drywall installations.
Fig. 5
Step 6
Slide AnoFrame onto wall mounting
hangers.
Fig 6
Note: The AnoFrame shown here is
a round profile. It is available in
either round or square profile.
Instructions For Assembly
Incept-8.15.02
Figure 1
Figure 5
The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSANFRNoLoadHanger
Figure 3
Corner
Brackets
AnoFrame Rails
12AF-100
Figure 2
Figure 4
Round Profile Instruction Sheet
top horizontal rail w/MultiClips
horizontal rail
side rail
Wall Mounting
Hangers
06-6067
Figure 6
