Parts
Window Mounts
20-0038
Instruction Sheet
AnoFrame™
Instructions for Hanging
Incept-8.15.02
The AnoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoFrameWindowMounts
AnoFrame rails
12AF-100
AnoFrame
split rails
Corner
brackets
Figure 1
Figure 5
Figure 3
Figure 4
split rails
Step 1
Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid
side Ano rail. Insert one corner
bracket into each end of each split
side Ano rail.
Fig. 1 & Fig. 2
Note:
Tension tabs on corner
brackets face towards outside of
frame.
Step 2
Slide the Wally Window Mounts
into the top rail of the AnoFrame
rail.
Fig. 3
Step 3
Finish assembling frame following the
sequence in
Fig. 4.
Step 4
Insert poster.
Fig 5
Note:
For best performance when
first applied and occasionally
thereafter, press the middle of the
cup (on the cap) to “burp” extra
air out.
Figure 2
split rails
solid rail
