Insert T-Gotcha holders into AnoGotcha shells.
Step 3
• Slide one T-Gotcha holder
into each AnoGotcha shell.
• Attach one shaped end
cap onto each end of both
AnoGotcha shells.
AnoGotcha is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any
sales agent may be held liable for injury, loss or damage resulting from the use of these products.
Part #02INSTeleAnoGotchaStand
35 Congress Street, Salem, MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Attach top AnoGotcha holder onto vertical poles.
Step 4
Incept-12.09.02
• Slide one threaded rod with
ball knob through top hole
in one vertical pole.
• Slide threaded rod
completely through top
channel of one AnoGotcha
holder and through top hole
of second vertical pole.
• Screw second ball knob
onto other end of threaded
rod. Tighten securely.
Slide T-Gotcha holder into each
AnoGotcha shell as shown.
Attach one shaped end cap onto
each end of AnoGotcha holders,
as shown.
You should now have two AnoGotcha holders with
one shaped end cap on each end.
Slide threaded rod through the
top hole of one vertical pole and
then through top channel of one
AnoGotcha holder.
Slide threaded rod through top hole
in second vertical pole. Screw ball
knob tightly onto threaded rod.
Your stand should now look like this.
T-Gotcha
shaped
end cap
vertical
pole
top
AnoGotcha
holder
11” round
base
ball knobs
AnoGotcha
shell
AnoGotcha
™
Stand
assembly continued
Te l e s c o p i n g