Attach bottom AnoGotcha holder to vertical poles.
Step 5
AnoGotcha is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any
sales agent may be held liable for injury, loss or damage resulting from the use of these products.
Part #02INSTeleAnoGotchaStand
35 Congress Street, Salem, MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Incept-12.09.02
Slide threaded rod through
appropriate hole and through
bottom channel of remaining
AnoGotcha holder.
Slide threaded rod through matching
hole on opposite vertical pole.
Attach ball knob, tighten securely.
Be sure locks are facing
same direction.
2”
14”
2”
8”
• Choose hole that matches
appropriate graphic distance
from floor.
• Slide one threaded rod
with ball knob through
appropriate hole in one
vertical pole and through
bottom channel of one
AnoGotcha holder.
• Slide through corresponding
hole of second vertical pole.
Note:
Make sure the hinge on the
bottom T-Gotcha faces up
and in the same direction as
the hinge on the T-Gotcha
at the top of the stand.
• Screw second ball knob
onto other end of threaded
rod. Tighten securely.
T-Gotcha hinge must face up and in the same direction as top T-Gotcha.
8”
14”
AnoGotcha
™
Stand
assembly continued
Te l e s c o p i n g
Numbers represent
distance from floor.
