Parts
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut.
Fig. 1
Note:
It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Slide the Gotcha Holder into the AnoQuick
Holder.
Fig. 2
Step 3
Push end caps into place.
Fig. 3
Note:
To remove Gotcha (and sign), simply rotate
end cap up out of the way.
Step 4
Suspend poster.
Fig. 4
Important note:
Please save and reuse the AnoQuick Holder,
Gotcha Holder, and End Caps for future projects.
Instruction Sheet
AnoQuick
TM
with Gotcha
®
Insert
Instructions for Hanging
Incept-8.15.02
The AnoQuick
TM
is a trademark and Gotcha
®
is a registered trademark of
Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be
held liable for injury, loss or damage resulting from the use
of these products.
Part #02INSAnoQuick w/Gotcha
Gotcha
®
Special
(no clip rail)
AnoQuick
Square Profile
12A300SQ
Figure 1
Figure 4
Figure 2
Figure 3
Square End Cap
06-5545
