1
Lay out the base components prior to assembling as shown (be sure that the upright assembly bosses
are facing upward). Use the two rectangular tubes to connect the base sides. Press joints together
firmly to ensure connectors engage the tubing.
Signware
AnoFrame Top Load
MultiStand
35 Congress Street, Salem, MA 01970 | 800.631.9707 | www.rosedisplays.com | signware@rosedisplays.com
AnoFrame™ is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales
agent may be held liable for injury, loss or damage resulting from the use of these products.
2 Full Rails
12AF100RT-B
A
2 Split Rails
12-0200-B
B
C
D
E
F
G
1 Short
Rail
2 long base connec-
tors
2 Base Sides
1 Right PN#
1 Left PN#
4 Casters
PN#
4 Pairs Brackets
PN#
Caution
Sharp
Corners!
(Up)
(Up)
F
F
E
E
P1
Completed base
(2) Bosses face
upward
(4)Threaded
corners face
floor
Part Layout
