Tabs face out
Tabs
face out
Smooth
sides
face out
2
3
Next, lay out the graphic frame components. Insert corner brackets into the tracks in each end of the long
side rails
. Use the short bottom rail and 2
split top rails to connect the long rails together.
Carefully press all corners together firmly to close all gaps in the corners.
Install the assembled graphic frame onto the base
frame. Press together firmly to engage tubing onto the
base connector.
*2 in each corner
** Single Bottom Rail
Signware
Plastic cap
*Single rail
Two thin
split rails
Plastic cap
Caution
Sharp
Corners!
** Split Top Rail
D
B
A
A
35 Congress Street, Salem, MA 01970 | 800.631.9707 | www.rosedisplays.com | signware@rosedisplays.com
AnoFrame™ is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales
agent may be held liable for injury, loss or damage resulting from the use of these products.
P2
