Parts
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Note:
You will be assembling four frames.
Below instructions are for one frame only.
Repeat steps 1 & 2 for each frame.
Step 1
Locate two split rails and a solid rail that is
the same length as the split rails.
Insert two corner brackets in each end of
the solid side AnoFrame rail. Insert one
corner bracket into each end of each split
side AnoFrame rails.
Fig. 1.
Note:
Tension tabs on corner brackets face
towards outside of frame rails.
Step 2
Assemble frame following steps in
Fig. 2
sliding sides together in the order shown.
Side-Loading AnoSkyBox
TM
Instructions for assembly
Incept-1.24.03
The AnoSkybox™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #03INSSideLoadingAnoSkyBox
Instruction Sheet
Figure 1
32 Corner
Brackets
12 AnoFrame Rails
12AF-100
8 AnoFrame
split rails
Figure 2
split rails
solid rail
solid rail
solid rail
split rails
1
2
3
4
