INTRODUCTION
CrystalLink USB3.0 Extender Cable Manual
1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product (See limited warranty).
Product Introduction
Thank you for choosing the Rose Electronics CrystalLink USB3.0 extender cable. The USB3.0 extender cable
delivers the advantages of super high-speed, 5Gbps USB3.0 throughput over copper cable. Simply plug the
cable into the host transmitter device and connect the remote end to a USB3.0 camera or other USB3.0 high-
speed device.
The USB3.0 extender cable provides transparent USB extension in a true plug-and-play format, with no
software or drivers required. The cable works with all major operating systems, including Windows®, Mac
OSX® and Linux®. The cable works with AIA USB3.0 Vision™ compliant devices such as machine vision
cameras.
The instructions in this manual assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB device operation. No external power is required to
operate this device.
Features
■
Extend USB3.0 high speed devices up to 50ft (15m)
■
Supports transparent USB3.0 throughput up to 5Gbps
■
Active cable, powered from the USB interface
■
USB3.0 output port provides 5V, 900mA power
■
USB locking connector included
■
Status LED at the device port with power, enumeration and over-current indication
■
Plug-and-play, requires no software or drivers
■
Rugged grade active copper cable
■
Works with AIA USB3.0 Vision
™
compliant devices
CAUTION: this product is not backward compatible with USB1.1 and USB2.0 devices
