Orion X Installation and Operations Manual
67
Saving and Loading of Configurations
The menus described in this section provide a variety of ways to save and recall configurations, whether
currently active configurations, internally stored configurations, or configurations saved on media external to
the Orion X equipment.
Active Configuration
This menu can only be accessed in the OSD.
Select
Configuration > Save
in the main menu.
By selecting this menu item, the admin user can save the active configuration of the matrix to its non-
volatile memory. By default, the last configuration saved in this way is restored as the active configuration
after a restart of the matrix.
Changing or saving configurations will block the matrix memory briefly, resulting in a freeze of all OSD menus
for a few seconds. The connections between consoles and CPUs are not affected.
If
Auto Save
is activated in the
Configuration > System
settings, an additional automatic saving of the
configuration will be performed periodically.
Saving of Configurations (internal)
This menu allows specifying a predefined internal storage location for saving the active configuration. This
does not replace the buffering of the Active Configuration described above. The menu can be accessed from
the OSD and the Java Tool.
Saving the Configuration to Internal Storage through the OSD
It is possible to save the created configuration to eight storage locations in the matrix (
File #1 - File #8
). The
configuration can also be saved as default configuration, to be restored whenever the matrix restarts.
Figure 60. Saving Internal Configuration
through the OSD
Active
shows the current
configuration’s name and
information. This is the configuration
to be saved.
Summary of Contents for Orion X OXC-08-GBIC/8FM
Page 139: ......
