Orion X Installation and Operations Manual
77
Setting Up a Matrix Grid through the OSD
In order to configure a Matrix Grid, proceed as follows. The following configuration steps have to be repeated
for each matrix switch in the grid separately.
1. Select
Configuration > System
in the main menu.
Figure 70. Setting Up a Matrix Grid through the OSD - Step 1
2. Enter unique name for each Matrix switch into the
Device
field. No two matrix switches within the Matrix
Grid can use the same name.
3. Enter a unique Grid name into the
Name
field. The Grid name has to be the same within all Grid matrices.
Confirm these name choices by clicking the Okay button.
4. Select
Configuration > Matrix Grid
in the main menu.
Figure 71. Setting Up a Matrix Grid through the OSD - Step 2
Summary of Contents for Orion X OXC-08-GBIC/8FM
Page 139: ......
