RackView Dual Rail Manual
2
Package Contents
The RackView package contents consist of the following:
1 x RackView sliding dual rail KVM drawer
2 x Mounting bracket sets (sliding rails) and support brackets (2)
1 x Set of plates, screws, rings, and washers for assembly
2 x Locking keys
1 x Combo interface cable, 5ft (1.8m)
1 x DVI and 1 x USB-AN interface cable, 5ft (1.8m)
1 x Power supply unit
1 x Power cable
1 x Manual
The above package content is only for the single console model. The contents can vary with options such as a
touchscreen, audio, and DC power.
Additional cables are usually ordered separately. If the package contents are not correct, contact Rose
Electronics or your reseller so the problem can be quickly resolved.
RackView Options
DVI/USB KVM Switch with 8 x CPU ports, USB2.0, 2-port hub and analog audio
Trackball mouse
Analog audio
DC power, +/-12V, +/-48V
Before Installation
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the mounting location has good ventilation, is out of direct sunlight, and away from sources of
excessive dust, dirt, heat, water, moisture, and vibration.
