manualshive.com logo in svg

Rose electronics RP2-1R2X16U, Installation And Operation Manual

The Rose electronics RP2-1R2X16U delivers top-notch multiuser functionality for seamless control in KVM environments. Ensure a hassle-free setup and optimized performance with the comprehensive Installation And Operation Manual. Download the user manual for free at 88.208.23.73:8080 and unlock the full potential of this exceptional product.

Share
Download
background image

 TABLE of CONTENTS 

 

 

Contents 

Disclaimer .................................................................................................................................................................1

 

About this manual .....................................................................................................................................................1

 

Introduction ...............................................................................................................................................................1

 

Features....................................................................................................................................................................2

 

Upgradeability........................................................................................................................................................2

 

Security .................................................................................................................................................................2

 

Flexibility ...............................................................................................................................................................2

 

On-screen display technology................................................................................................................................2

 

Compatibility..........................................................................................................................................................2

 

Cable requirements ...............................................................................................................................................3

 

Package contents ..................................................................................................................................................3

 

Rose Electronics web site......................................................................................................................................3

 

UltraMatrix Remote Models .......................................................................................................................................4

 

Rear Panel ............................................................................................................................................................4

 

System overview.......................................................................................................................................................5

 

UltraMatrix Remote Installation..................................................................................................................................6

 

Connecting the hardware .......................................................................................................................................6

 

Connecting the KVM station ...............................................................................................................................6

 

Connecting to the network ..................................................................................................................................6

 

Connecting the computers..................................................................................................................................6

 

Configuring the Unit ...............................................................................................................................................7

 

Menu structure ..........................................................................................................................................................9

 

Main Menu ..............................................................................................................................................................10

 

Configure System menu ......................................................................................................................................11

 

“System settings” .................................................................................................................................................11

 

Configure password .........................................................................................................................................11

 

Starting computer number ................................................................................................................................11

 

Maximum computers ........................................................................................................................................12

 

PC keyboard rate (chars/sec ............................................................................................................................12

 

PC keyboard delay...........................................................................................................................................12

 

Sun keyboard language....................................................................................................................................12

 

Menu color scheme .............................................................................................................................................12

 

Screen saver .......................................................................................................................................................12

 

Screen saver time (seconds) ............................................................................................................................13

 

Background / Text color....................................................................................................................................13

 

Position............................................................................................................................................................13

 

Fadeout (seconds) ...........................................................................................................................................13

 

Configure Computer menu...................................................................................................................................14

 

Computer name ...............................................................................................................................................14

 

Keyboard .........................................................................................................................................................15

 

Mouse ..............................................................................................................................................................15

 

Configure KVM menu...........................................................................................................................................16

 

KVM name .......................................................................................................................................................16

 

Resolution........................................................................................................................................................16

 

Start.................................................................................................................................................................17

 

User .................................................................................................................................................................17

 

Configure User menu...........................................................................................................................................18

 

User name .......................................................................................................................................................18

 

Password .........................................................................................................................................................18

 

Profile ..............................................................................................................................................................18

 

Configure profile menu.........................................................................................................................................19

 

Name...............................................................................................................................................................19

 

Access .............................................................................................................................................................19

 

Mode................................................................................................................................................................19

 

Share ...............................................................................................................................................................20

 

Scan ................................................................................................................................................................20

 

Summary of Contents for RP2-1R2X16U





































































Reviews:

No comments

Related manuals for RP2-1R2X16U

Campbell Hausfeld CW301300AJ Operating Instructions And Parts Manual preview
CW301300AJ
Brand: Campbell Hausfeld Pages: 12
Qlogic SANbox 5000 Series Quick Start Manual preview
SANbox 5000 Series
Brand: Qlogic Pages: 8
UNICOM DynaGST/2402G GEP-33224T-1 Specifications preview
DynaGST/2402G GEP-33224T-1
Brand: UNICOM Pages: 1
UNICONTROL Electronic Cleveland Controls RSS-498-013 Manual preview
Cleveland Controls RSS-498-013
Brand: UNICONTROL Electronic Pages: 2
Magnetrol B75 Installation And Operating Manual preview
B75
Brand: Magnetrol Pages: 28
Kramer VS-421 User Manual preview
VS-421
Brand: Kramer Pages: 8
Cross Technologies 1582-225L2 Instruction Manual preview
1582-225L2
Brand: Cross Technologies Pages: 20
Aeon Labs Aeotec Micro Smart Energy Switch G2 Manual preview
Aeotec Micro Smart Energy Switch G2
Brand: Aeon Labs Pages: 11
Witura WT-1672D User Manual preview
WT-1672D
Brand: Witura Pages: 21
Gefen DVI-841 User Manual preview
DVI-841
Brand: Gefen Pages: 11
PhD Solutions MXC-P442-HDTL Operation Manual preview
MXC-P442-HDTL
Brand: PhD Solutions Pages: 23
Dahua Technology DH-PFS4428-24GT-370 User Manual preview
DH-PFS4428-24GT-370
Brand: Dahua Technology Pages: 44
Veris Industries Hawkeye 738 Installation Manual preview
Hawkeye 738
Brand: Veris Industries Pages: 2
SDMO VERSO 50 Instruction Manual preview
VERSO 50
Brand: SDMO Pages: 24
Hirschmann RH1-CX+ Operating Instructions Manual preview
RH1-CX+
Brand: Hirschmann Pages: 8
TRENDnet TK-1604R Quick Installation Manual preview
TK-1604R
Brand: TRENDnet Pages: 19
Wise P941 Instruction Manual preview
P941
Brand: Wise Pages: 8
Dell 3WY51 Firmware Upgrading Instruction preview
3WY51
Brand: Dell Pages: 17

Brands by name

Popular brands

Load more brands