If the Ethernet is connected like the Picture (A), it shows the Ethernet information.
If you click Static IP in the Picture (B), it will be moved to the window where you can set IP manually.
(A)
(B)
In the Picture (C), enter the IP to be manually entered into the Static IP (A), and then click the IP Setting (B) button to
manually set the IP.
(C)
2)
Wi-Fi settings (wireless)
You can connect the network using Wi-Fi.
If WiFi is not activated, you can see WiFi list like Picture (B) by clicking 'Activate Button' in Picture (A).
(A)
(B)
If you click on the WiFi you want to connect from the WiFi list in Picture (B), a pop-up window will appear for entering the
password as shown in Picture (C).