- 18 -
- 19 -
ENGLISH
Product Installation
1. Product Design Direction and Installation Location
• This product is designed for proper use on a table or shelf.
• The product may malfunction due to high heat in the winter or summer.
(Operating temperature : 0℃ ~ 40℃ / Storage temperature : -10℃ ~ 50℃)
• If the installation space is small, make sure to provide adequate ventilation.
You can ensure a longer life cycle for electronics by providing proper ventilation
and taking care to avoid excess heat. Do not install this product directly above
devices that produce heat, such as power amplifiers.
• The figure below show the minimum ventilation requirements.
• Maintain a gap of at least 2.5cm on each side of the product to prevent
restrictions on air flow.
• Ensure a depth of 35cm for airflow and cabling.
25mm
25mm
25mm
25mm
350mm
2. How to connect the Power Cord
• This product contains a removable power cord. Please connect the power cord
after all other connections are completed. First, connect the power cord to the
product’s AC inlet port, and then connect it to an outlet.
Caution
:
When disconnecting the power cord, always disconnect the outlet first.
