- 20 -
- 21 -
ENGLISH
3-2. Connecting the Analog Input Port and the Audio Device
• As shown in the figure below, you can connect the analog output of an external
device such as a CD player to the analog audio input of this product.
• When using the analog audio input as a source, you must switch the input
source to ‘ANALOG In’ in the Input/Output Settings. Input/Output Settings
can be changed from the home screen, settings, settings of the ROSE Connect
Premium App, and the remote controller.
3. How to properly connect the Rear Port and the Cable
3-1. Connecting the Analog Output Port and the Power Amplifier or AV Receiver
• You can connect the analog audio output of this product to the Analog input of
a power amplifier or AV receiver as shown below.
• You can select ‘Variable’ or ‘Fixed’ through the pre-out level settings to adjust
the volume of the analog audio output of this product.
Caution
:
Before connecting the product to the power amplifier, set the volume
to mute or below step 5 and then connect it using an RCA cable.
When music is being played on this product with the volume turned up,
a loud shock sound may occur when the cable is connected.
