- 22 -
- 23 -
ENGLISH
3-4. Connecting the USB Audio Output Port and the External DAC
• This product has a USB Audio Out terminal that allows you to connect a
separate USB DAC.
• After connecting an external USB DAC to the USB Audio Out terminal of the
product, you must activate the output device as an external USB DAC in the
Input/Output Settings.
※
This product complies with the USB Audio Class 2.0 standard.
3-3. Connecting the Digital Input/Output Port and Audio
Device(TV or Digital Input/Output Support Device)
• As shown in the figure below, you can connect the Digital input/output of an external
device to the Digital(Optical/Coaxial) input/output port of this product to use it.
• This product can reproduce linear PCM signals with sampling frequencies of
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz.
• When using a Digital input, you need to switch the input source to ‘Optical In’ or
‘Coaxial In’ in the Input/Output Settings.
• To export Digital output, the output mode must be set to ‘Optical Out’ or
‘Coaxial Out’ in the Input/Output Settings.
• Input/Output Settings can be changed from the home screen, Settings, Settings
of the ROSE Connect Premium App, and the Remote Controller.
Caution :
Do not input signals other than linear PCM signals such as Dolby Digital,
DTS, AAC, etc., into this device. Doing so may generate noise and damage
the speaker.
