- 38 -
- 39 -
ENGLISH
2-2-1-4. Roon Volume Control
• Select the volume control method(Hardware, Software, Fixed) in Roon Ready
mode. You can select Hardware/Software/Fixed for USB DAC, but if the USB DAC
does not support the hardware volume control function, the volume will not be
adjusted when ‘Hardware’ is selected.
2-2-1-5. OUTPUT Gain
• Adjust the gain value for Digital Output. If distortion occurs when connecting to
an external receiver or DAC, adjust the Output Gain value accordingly.
2-2-2. HDMI
• You can set up HDMI.
• When you select the setting icon for HDMI, the HDMI Settings screen appears as
shown below.
2-2-2-1. PCM Resampling Frequency
• This is the menu for Setting the Sampling Frequency. Select ‘Original Sampling
Rate’ if you want to output the original sound, or select the desired sampling
rate(48kHz, 96kHz, 192kHz, etc.) to use the re-sampling function.
2-2-2-2. DSD Mode
• Select the transmission format(Native, DOP, PCM) of Audio Samples to be
delivered to the DAC when playing DSD music files. For HDMI output, only DSD
to PCM is possible.
