- 18 -
2. Rear Side of the Product
AC Power
Inlet
Circuit
Breaker
GND
Preamp
Output(R,L)
Line
Input(L,R)
Coaxial
In/Out
Optical
In/out
IR In HDMI
Output
USB
PC
AUDIO
Ethernet eARC
Input
Speaker
Output(L)
Speaker
Output(R)
TRIGGER
In/Out
AC Power Inlet
Connect the AC power cable here.
Circuit Breaker
A power circuit breaker is employed to improve the conductivity of the input
electricity, and the resolution of the sound quality is improved by securing a
wide passage for the input electricity.
GND
This is a port that connects the external device to the ground.
USB Audio In
-
You can use this product as a USB DAC of your computer after connecting
the PC audio port on the back to the computer using a USB type B cable.
Optical In
-
Connect the optical cable to this port to receive digital signals (44.1 - 192 ㎑).
Optical Out
-
Connect the optical cable to this port to output digital signals (44.1 - 192 ㎑).
Speaker
Output(L/R)
It is composed of 2ch stereo and outputs 250 W (8 Ω) for each channel.
Analog In
-
Connect the RCA cable to this port to receive analog signals (Max: 9.0 ㏈u / 2.2 Vrms).
Analog Out
-
Connect the RCA cable to this port to output analog signals (Max: 9.0 ㏈u / 2.2 Vrms).
Ethernet
-
Connect the LAN cable to this port.
USB 3.0
You can connect a USB storage device to play music fi les, or connect a
CD-ROM to use the ripping function.
HDMI
-
You can connect the HDMI cable to play the video output (up to
3840x2160 / 60 ㎐) signal on your TV or monitor.
eARC
Connect the eARC output (HDMI) port of the TV to the eARC input (HDMI) port of this device.
Coaxial In
-
Connect the coaxial cable to the terminal to receive digital signals (44.1 - 192 ㎑).
Coaxial Out
-
Connect the coaxial cable to the terminal to output digital signals (44.1 - 192 ㎑).
Trigger Input
Port
-
This is a function that automatically turns on the set without operation through the
remote control when DC 3.3 - 12 V power is supplied from an external device.
(
Caution : It will be switched back on when the trigger input for this set is
powered off with power applied. Be sure to turn off the power of the external
device as well.)
Trigger Output
Port
After pressing the power button on this set, the DC 12 V power is output as a
trigger out at the time the main screen booting is completed.
(This function is for synchronizing power with external devices.)
IR In
Connect the external IR cable to the IR IN port of this product, and place
it in a place where remote control reception is well received.
