manualshive.com logo in svg

Rose electronics UCR-1R1X16U/2, Installation And Operation Manual

The Rose electronics UCR-1R1X16U/2 is a high-quality KVM switch that allows you to control multiple computers using just one set of peripherals. Ensure seamless setup and operation with our comprehensive Installation and Operation Manual, available for free download at 88.208.23.73:8080. Get your hands on this essential manual now!

Share
Download
background image

TABLE of CONTENTS 

 

 

Contents                                                                                                                                              Page # 
 

Disclaimer ........................................................................................................................................................................ 1

 

Introduction ...................................................................................................................................................................... 1

 

About this manual ............................................................................................................................................................ 1

 

Features .......................................................................................................................................................................... 2

 

Upgradeability .............................................................................................................................................................. 2

 

Security ........................................................................................................................................................................ 2

 

Flexibility ...................................................................................................................................................................... 2

 

On-screen display technology ..................................................................................................................................... 2

 

Compatibility ................................................................................................................................................................ 2

 

Cable requirements ..................................................................................................................................................... 3

 

Package contents ........................................................................................................................................................ 3

 

Rose Electronics web site ............................................................................................................................................ 3

 

UltraConsole Remote 2 Models ...................................................................................................................................... 4

 

System overview ............................................................................................................................................................. 5

 

UltraConsole Remote 2 Installation (Single unit) ............................................................................................................ 6

 

Connecting the hardware ............................................................................................................................................. 6

 

Configuring the UltraConsole Remote 2 IP Input module ........................................................................................... 7

 

KVM Switch Module Menu structure ............................................................................................................................. 19

 

Switch module - Main Menu .......................................................................................................................................... 20

 

Configure System menu ............................................................................................................................................ 21

 

System settings ......................................................................................................................................................... 21

 

Appearance settings .................................................................................................................................................. 22

 

Configure Computer menu ........................................................................................................................................ 23

 

Configure KVM menu ................................................................................................................................................ 25

 

Configure User menu ................................................................................................................................................. 26

 

Configure profile menu .............................................................................................................................................. 27

 

Configure group menu ............................................................................................................................................... 28

 

Configure Language .................................................................................................................................................. 29

 

System Status display ............................................................................................................................................... 30

 

Save menu ................................................................................................................................................................. 31

 

Switch Installation – Single Unit .................................................................................................................................... 32

 

Switch Installation – Multiple units – “BUS” topology .................................................................................................... 34

 

Connecting the expansion units ................................................................................................................................ 35

 

Remote System Operation ............................................................................................................................................ 36

 

Connecting using a web browser / VNC Viewer ........................................................................................................ 36

 

Serial Device Support .................................................................................................................................................... 41

 

Service Information ....................................................................................................................................................... 47

 

Maintenance and Repair ............................................................................................................................................ 47

 

Technical Support ...................................................................................................................................................... 47

 

Safety ............................................................................................................................................................................ 48

 

Safety and EMC Regulatory Statements ................................................................................................................... 49

 

Safety Information ...................................................................................................................................................... 49

 

Safety and EMC Regulatory Statements ................................................................................................................... 49

 

Informations concernant la sécurité ........................................................................................................................... 49

 

Troubleshooting ............................................................................................................................................................. 50

 

 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for UCR-1R1X16U/2





































































Reviews:

No comments

Related manuals for UCR-1R1X16U/2

Quick TMS Manual Of Installation And Use preview
TMS
Brand: Quick Pages: 28
3One data IPS7110-2GC-8POE Quick Installation Manual preview
IPS7110-2GC-8POE
Brand: 3One data Pages: 3
Magnetrol B75 Installation And Operating Manual preview
B75
Brand: Magnetrol Pages: 28
Sams RSS-10v User Manual For Use And Maintenance preview
RSS-10v
Brand: Sams Pages: 14
Z-Band ZBT0100052 User Manual And Installation Manual preview
ZBT0100052
Brand: Z-Band Pages: 13
H3C S6520X-EI Series Manual preview
S6520X-EI Series
Brand: H3C Pages: 34
G-Lab GSC-3 User Manual preview
GSC-3
Brand: G-Lab Pages: 12
Elements LINQ LQ48006 Product Manual preview
LINQ LQ48006
Brand: Elements Pages: 2
Kobold TDD Operating Instructions Manual preview
TDD
Brand: Kobold Pages: 23
Alloy AMS-10T2SFP Quick Install Manual preview
AMS-10T2SFP
Brand: Alloy Pages: 33
NA-DE 03009 Manual preview
03009
Brand: NA-DE Pages: 4
Enterasys SecureStack B2 B2G124-48P Hardware Installation Manual preview
SecureStack B2 B2G124-48P
Brand: Enterasys Pages: 91
Allied Telesis Extricom AT-EXLS-3000 Installation And User Manual preview
Extricom AT-EXLS-3000
Brand: Allied Telesis Pages: 120
MicroNet SP684C User Manual preview
SP684C
Brand: MicroNet Pages: 74
Hamlet HUSB420 User Manual preview
HUSB420
Brand: Hamlet Pages: 2
Primewire 302523/20191008SZ114 User Manual preview
302523/20191008SZ114
Brand: Primewire Pages: 12
G&D DP1.2-MUX2-NT Installation And Operation Manual preview
DP1.2-MUX2-NT
Brand: G&D Pages: 76
Renesas Pod Probe for 7906 Group MCUs M37906T-PRB User Manual preview
Pod Probe for 7906 Group MCUs M37906T-PRB
Brand: Renesas Pages: 42

Brands by name

Popular brands

Load more brands