KEYBOARD COMMANDS
CRYSTALVIEW PLUS USB INSTALLATION AND OPERATIONS MANUAL
11
Keyboard commands
Note: Use only the numeric keys above the keyboard to initiate the keyboard
commands from the remote unit. Do not use the numeric keypad.
NOTE: All keyboard commands are initiated from the Remote unit.
Before any keyboard command can be issued, the unit must
be in the command mode and a channel selected.
Command
Key Sequence
Command Mode
[L-Ctrl] + [L-Shift] + [F10]
Exit Command Mode and save
[ESC]
Exit Command Mode without saving
[L-Shift] + [ESC]
Select Channel 1or 2
[1] / [2]
Select Channel 0
[0] (select all channels)
Reset EQ & Delay values
[L-Ctrl] + [Home]
Next Assisted EQ setting
[L-Ctrl] + [PgUp]
Previous Assisted EQ setting
[L-Ctrl] + [PgDn]
Increase RED delay
[R] + [R-arrow]
Decrease RED delay
[R] + [L-arrow]
Increase Green delay
[G] +[R-arrow]
Decrease Green delay
[G] + [L-arrow]
Increase Blue delay
[B] + [R-arrow]
Decrease Blue delay
[B] + [L-arrow]
Toggle RED delay
[L-Ctrl] + [R]
Toggle GREEN delay
[L-Ctrl] + [G]
Toggle BLUE delay
[L-Ctrl] + [B]
Reset EQ values
[L-Ctrl] + [End]
Increase LF EQ (Course)
[L] + [Up Arrow]
Decrease LF EQ (Course)
[L] + [Dn Arrow]
Increase LF EQ (Fine)
[L] + [R-Arrow]
Decrease LF EQ (Fine)
[L] + [L-Arrow]
Increase HF EQ (Course)
[H] + [Up Arrow]
Decrease HF EQ (Course)
[H] + [Dn Arrow]
Increase HF EQ (Fine)
[H] + [R-Arrow]
Decrease HF EQ (Fine)
[H] + [L-Arrow]
Reset keyboard and mouse
[F1]
Send NULL mouse byte
[F3]
Reset to factory defaults
[L-Ctrl] + [F9]
Toggle Unit Private Mode
[Scroll Lock]
Table 1. Keyboard Commands
