background image

SAFETY 

Installation and Operations Manual 

 

 
The Vista DVI USB KVM switch has been tested for conformance to safety regulations 
and requirements, and has been certified for international use.  Like all electronic 
equipment, the Vista DVI USB KVM switch should be used with care.  To protect yourself 
from possible injury and to minimize the risk of damage to the Unit, read and follow these 
safety instructions. 
 

 

Follow all instructions and warnings marked on this Unit. 

 

Except where explained in this manual, do not attempt to service this unit yourself. 

 

Do not use this unit near water. 

 

Assure that the placement of this unit is on a stable surface or rack mounted. 

 

Provide proper ventilation and air circulation. 

 

Keep power cord and connection cables clear of obstructions that might cause 
damage to them. 

 

Use only power cords, power adapter and connection cables designed for this Unit. 

 

Use only a grounded (three-wire) electrical outlet. 

 

Use only the power adapter provided with the unit. 

 

Keep objects that might damage this Unit and liquids that may spill, clear from this 
Unit. Liquids and foreign objects might come in contact with voltage points that could 
create a risk of fire or electrical shock. 

 

Operate this Unit only when the cover is in place. 

 

Do not use liquid or aerosol cleaners to clean this Unit.  Always unplug this Unit from 
its electrical outlet before cleaning. 

 

Unplug this Unit from the electrical outlet and refer servicing to a qualified service 
center if any of the following conditions occur: 

 

The power cord or connection cables are damaged or frayed. 

 

The Unit has been exposed to any liquids. 

 

The Unit does not operate normally when all operating instructions have been 
followed. 

 

The Unit has been dropped or the case has been damaged. 

 

The Unit exhibits a distinct change in performance, indicating a need for service. 

 

Documentation reference symbol. If the product is marked with this symbol, refer to 
the product documentation to get more information about the product. 

 

WARNING 

   A WARNING in the manual denotes a hazard that can cause injury or death.  

CAUTION 

A CAUTION in the manual denotes a hazard that can damage equipment. 

Do not proceed beyond a WARNING or CAUTION notice until you have understood the 
hazardous conditions and have taken appropriate steps. 
 

Grounding 

There must be an un-interruptible safety earth ground from the main power source to the 
product’s input wiring terminals, power cord, or supplied power cord set. Whenever it is 
likely that the protection has been impaired, disconnect the power cord until the ground 
has been restored. 
 

Servicing  

There are no user-serviceable parts inside these products. Only service-trained personnel 
must perform any servicing, maintenance, or repair. 
The user may adjust only items mentioned in this manual. 

 
 
 

Summary of Contents for VISTA DVI

















Reviews: