Operating instructions
The Vista switch is very easy to operate. Computer selection and set-up
functions are entered from the keyboard. You can also select computers
manually from the front panel buttons. Vista models with the on-screen display
(OSD) option can select computers by choosing from an on-screen list of the
computers.
Keyboard command
Following is a condensed description of the Vista keyboard command functions.
See the Installation and Operations manual for a complete list.
The <Ctrl> input is a press and release of the left control key. Within
2 seconds of pressing and releasing the left <Ctrl> key, enter the next
command.
Command
Key Sequence
Description
Invoke the On
Screen Display
<Ctrl> F12
Displays the on-screen display
for models with this option
List computers
<Ctrl> Esc
Provides a list of connected
computers to connect to
Reset
command
<Ctrl> R
Resets and enables mouse
and keyboard, enables PS/2
mouse on currently selected
port.
Keep
<Ctrl> K
Saves current scan state and
custom settings.
Mouse type
<Ctrl> Q x <Enter>
Where:
x = 0 for PS/2
x = 1 for Serial
x = 2 for Wheel
First select the CPU port, and
then enter the type command
Computer
Select
<Ctrl> x
(x = 1, 2, 3, 4,
5, 6, 7, 8)
Connects your keyboard, video
monitor, and mouse to the
selected computer.
Computer
disconnect
<Ctrl> L
Disconnects from computer.
