9
Rosen Entertainment Systems
USING THE DISPLAY-MOUNTED CONTROLS
1
2
4
5
6
7
3
8
1 Release
—Press to lower the screen.
2 LCD Display
—Displays information about your system’s status.
3Up/Down
—Press both buttons at the same time to access the
FPD Menu and change the color, contrast, brightness, and tint of
your flat panel display monitor. See “Changing Monitor Settings”.
4 Source
—Press to select a viewing source.
DVD:
Press to select DVD mode, TV mode, or auxiliary mode.
VCR:
Press to select VCR mode, TV mode, Line 1, or Line 2.
5 Speaker On/Off
—Press to turn on/off the FM Modulator.
When the FM Modulator is on, you can hear ClearVue audio over
the vehicle's speakers. When the FM Modulator is off, you can
hear ClearVue audio by using the supplied wireless headphones.
To listen to the vehicle sound system normally, turn off the
FM Modulator.
6 Mute
—Mutes ClearVue audio to FM Modulator and headphones.
7 Dome Light On
—10.4" displays only. Press to turn on the dome
light when the doors are closed. Press again to turn the dome
light off. When backlit
red
, dome light stays on whether the door
is open or closed.
8 Dome Light Disable
—10.4" displays only. Press to prevent
illumination when a door is open. When backlit
red
, dome light
remains off, even when doors are open.
Note: When dome light buttons are backlit green, dome lights
operate normally, illuminating when a door opens and turning off
when doors close. See “Using the Dome Lights”.
All manuals and user guides at all-guides.com
