background image

1080p30 hd video 1080 lines 30
1080p50 hd video 1080 lines 50
1080p59 hd video 1080 lines 60 pull down
1080p60 hd video 1080 lines 60

Most common SD and HD video standards are
printed bold.

Setup utility

Please   visit   www.rosendahl-studiotechnik.com
and download the latest soft/ firmware available
for Mac OSX and Windows.

When the unit is connected in normal operation
mode   the   mif4   utility   software   allows   you   to
configure   parameters   like   a   unique   MMC   ID,
display   brightness,   display   blanking   and   other
options.   You   find   more   informations   in   the
software help.

All settings are stored non volatile. 

USB drivers

mif4 is a so called "device class compliant USB
Audio   Device"   and   does   not   need   a   driver
installation. Windows XP or later as well as Mac
OS X provide generic USB audio drivers.

If you plug in the unit for the first time Windows
will find the new hardware and install its generic
drivers automatically.

If mif4 isn't detected by Windows you may need 
to configure the Windows Device Manager to 
show all hidden and ghosted devices to evaluate
the problem and possibly remove/delete 
obsolete devices.

Find help at Microsoft support how to 

display 

ghosted devices in Device Manager

….

Unfortunately   Windows   generic   USB   Audio
Device   drivers   do   not   provide   multi-client
capability,  which  means  you  can only use  one
application with the USB MIDI I/O ports at once.

So you can not receive the mif4 MTC MIDI time
code with two different programs simultaneously.

Specific   mif4   multi-client   capable,   low   latency
drivers   for   32-   and   64-bit   Microsoft   Windows
systems can be downloaded at:

www.rosendahl-studiotechnik.com

Mac OS X USB drivers support multiple clients 
and thus, there is no need to install extra mif4 
device drivers.

To verify the generic OS X driver installation 
please run Applications/Utilities/Audio MIDI 
Setup and open the Window "MIDI Studio".

Declaration of  CE conformity

Rosendahl Studiotechnik GmbH
Andechser Str. 5
D-86919 Utting a.A.
Germany

herewith confirms that the product:
Type:

professional midi timecode interface

Model:

mif4

meets the requirements of the council of the European
communities   relating   to   electromagnetic   compatibility
(Council Directive 89/336/EEC)

Technical Data:  EMV  EN 55022, EN 61000

         Electric Safety

EN 60950

The  CE  symbol  is awarded  to high-quality  appliances
which comply with the European Directive 89/336/EEC
or   the   EMVG   (law   relating   to   electromagnetic
compatibility   of   appliances)   and   which   offer     the
following significant benefits:

*Simultaneous   and   interference-free   operation   of
adjoining appliances
*No unpermitted interference signals
*High resistance to electro-smog

This   marking   shown   on   the   product   or   its   literature
indicates   that   it   should   not   be   disposed   with   other
household   wastes   at   the   end   of   its   working   life.   To
prevent   possible   harm   to   the   environment   or   human
health   from   uncontrolled   waste   disposal,   please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material
resources.

Household   users   should   contact   either   the   retailer
where   they   purchased   this   product   or   their   local
government office for details of where and how they can
take this item for environmentally safe recycling.

Business users should contact their supplier and check
the terms and conditions of the purchase contract.

Summary of Contents for mif 4

Page 1: ...ost computer connected via USB GEN manually or MMC controlled timecode generator mode Holding down the left key for two seconds causes 1 a JAM SYNC from applied running timecode into the GEN mode 2 or if no timecode signal is present you will be able to store the default SOURCE setting to non volatile memory See generator section for more informations about JAM SYNC LTC input mode LTC is longitudi...

Page 2: ... stationary LTC timecode The unit repeats one LTC frame 8 times On the LED display there are DECIMAL POINTS to separate hours minutes seconds and frames 00 00 00 00 The rightmost decimal point to the right of the frame digits is used as a LOCKED indicator If the unit is in sync and outputs locked timecode this LOCKED indicator will light up In MTC or USB input modes the LOCKED threshold is 5ms in ...

Page 3: ... display the letter r indicates reference locked the video reference input signal is used for synchronising the actual timecode generation I stands for Input and indicates that only the timecode input source is used to synchronise the actual timecode generation LTC mode always references to the input signal even when a valid reference signal with matching frame rate is applied In MTC or USB mode t...

Page 4: ... systems can be downloaded at www rosendahl studiotechnik com Mac OS X USB drivers support multiple clients and thus there is no need to install extra mif4 device drivers To verify the generic OS X driver installation please run Applications Utilities Audio MIDI Setup and open the Window MIDI Studio Declaration of CE conformity Rosendahl Studiotechnik GmbH Andechser Str 5 D 86919 Utting a A German...

Reviews: