4-Ports High-speed USB 2.0 ExpressCard
RC-611 User Manual
3
Hardware Installation
General instructions for installing the card are provided below. Since the
design of system may vary, refer to your system’s reference manual for
further information, if needed.
Insert the Card into the ExpressCard slot of your system. Make sure it is
inserted all the way in for a solid connection.
Driver Installation
Important:
If your system doesn’t boot to Windows properly with our
card installed, check with your system’s manufacturer for the latest
system firmware update.
For Windows® 2000/XP/Server 2003/Vista
Once the Windows® 2000, XP, Server 2003 and Vista startup, USB 2.0
ExpressCard will be installed automatically without driver installing.
Please update your operating system to Windows® 2000 Service Pack 4,
Windows® XP Server Pack 1 or later version.
To Verify Windows Installation
Click on the
“Device Manager”
tab in System Properties, which you
access from the Windows Control Panel. You should see an entry of the